The Omni Group
These forums are now read-only. Please visit our new forums to participate in discussion. A new account will be required to post in the new forums. For more info on the switch, see this post. Thank you!

Go Back   The Omni Group Forums > OmniFocus > OmniFocus Extras
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
Looking for script to toggle parallel/sequential Thread Tools Search this Thread Display Modes
I seem to need parallel and sequential projects about 50/50, so the ability to set a preference for one or the other is just a tease.

Does anyone happen to have a script that will toggle a project from parallel to sequential or vice versa? It would be ideal if all I had to do is have a task currently selected and have the script change the project.

It would be great if there were just a keyboard shortcut for this, but alas, I couldn't find a menu option for it. Maybe I'm just mistaken, though :)
 
Quote:
Originally Posted by vinyl_warrior View Post
Does anyone happen to have a script that will toggle a project from parallel to sequential or vice versa? It would be ideal if all I had to do is have a task currently selected and have the script change the project.
As parent tasks within the same project can have different parallel/sequential settings, I am guessing that you want to
  1. Toggle the project's status
  2. Reset the status of all the contained parent tasks to match that of the project

If so, then then you should edit the value of the property pblnTasksChangeWithProject near the top of the script to true
If, however, you just want to toggle the status of the project, and leave unchanged the state of any parent tasks within the project, then you should leave the value of the property pblnTasksChangeWithProject as false

Code:
-- Toggles the selected project(s)
-- (or the project(s) of the selected task(s))
-- between sequential and parallel

-- If this property is set to TRUE,
-- the status of ALL PARENT TASKS is changed to match the 
-- new status of the project itself.
-- if it is set to false, ONLY THE PROJECT ITSELF is toggled, 
-- and the status of any contained parent tasks is left unchanged.
property pblnTasksChangeWithProject : true

tell application "OmniFocus"
	tell front document window of default document
		set refSeln to a reference to (selected trees of content)
		if (count of refSeln) < 1 then ¬
			set refSeln to a reference to (selected trees of sidebar)
		if (count of refSeln) < 1 then return
		
		-- gather a list of selected projects to be toggled
		set lstObjects to value of refSeln
		set lstProjects to {}
		repeat with oObj in lstObjects
			set cClass to class of oObj
			if cClass is project then
				if not my IsMember(oObj, lstProjects) then ¬
					set end of lstProjects to oObj
			else if cClass is task then
				set oProj to containing project of oObj
				if not my IsMember(oProj, lstProjects) then ¬
					set end of lstProjects to oProj
			end if
		end repeat
		
		-- toggle each project
		repeat with oProj in lstProjects
			set blnNewState to not sequential of oProj
			my SetState(oProj, blnNewState)
		end repeat
	end tell
end tell

-- Either toggles just the project itself
-- or, if pblnTasksChangeWithProject is TRUE,
----	(see top of script)
---- recursively sets all tasks to match the 
---- new status of the project
on SetState(oObject, blnNewState)
	using terms from application "OmniFocus"
		tell oObject
			set sequential to blnNewState
			if pblnTasksChangeWithProject then
				set lstTasks to tasks
				repeat with oTask in lstTasks
					my SetState(oTask, blnNewState)
				end repeat
			end if
		end tell
	end using terms from
end SetState

-- Simple test for list membership
-- used to ensure that we don't toggle the same project twice
on IsMember(oElement, lstList)
	using terms from application "OmniFocus"
		repeat with oItem in lstList
			if id of oItem is id of oElement then return true
		end repeat
		false
	end using terms from
end IsMember

Last edited by RobTrew; 2010-06-24 at 12:40 AM..
 
Awesome, Rob!

Is there a way to make it so that if the currently selected task were a child task (ie. a task within a subproject) then the script would change the parent task and not the project. Basically, to get the script to toggle the status of the project/subproject that is one up from what it is currently selected.

Or maybe it's easier to have a separate script that just changes the subproject...

Thanks so much for your help!
 
Quote:
Originally Posted by vinyl_warrior View Post
Is there a way to make it so that if the currently selected task were a child task (ie. a task within a subproject) then the script would change the parent task and not the project. Basically, to get the script to toggle the status of the project/subproject that is one up from what it is currently selected.
Here is a redraft which can be fine-tuned by setting two properties at the top of the script:
  1. pblnImmediateParentOnly
  2. pblnAllDescendantsInherit

If pblnImmediateParentOnly is set to TRUE, only the immediately selected object (or its immediate parent (task or project) if it is a childless leaf task) is the root of the toggle.
If pblnImmediateParentOnly is set to FALSE, the root of the toggle is the selected project, or the project containing the selection.

If pblnAllDescendantsInherit is set to TRUE, the specified root node (a project or a parent task) is toggled, and all of its descendants, unto the last generation, inherit its new parallel/sequential setting.
If pblnAllDescendantsInherit is set to FALSE, then only the immediate node is toggled, and any contained parent tasks retain their settings.

(A rough draft, I recommend a little testing and experimentation on dummy data before you start to use it)

Code:
-- Toggles selected project(s) / or parent task(s) between parallel and sequential
-- The root of the toggle may be the project or the immediate parent task
-- The result of the toggle may optionally be inherited by all descendants

-- See the settings of the following two boolean properties:

-- If TRUE the root of the toggling is the selected project
-- or selected parent task
-- or the immediate parent of the selected leaf task
-- if FALSE the root of the toggling is the selected PROJECT
-- or the PROJECT containing the selected task
property pblnImmediateParentOnly : true

-- If TRUE the root node is toggled, and ALL its descendants inherit the 
-- the new status, down to the last generation
property pblnAllDescendantsInherit : false


tell application "OmniFocus"
	set oWin to front document window of default document
	set lstSeldObjects to my SelectedObjects(oWin)
	
	set lstParents to {}
	repeat with oObject in lstSeldObjects
		set cClass to class of oObject
		if cClass is project or cClass is task then
			if cClass is project then
				set oParent to oObject
			else -- cClass is Task
				if pblnImmediateParentOnly then
					if (count of tasks of oObject) > 0 then
						set oParent to oObject
					else
						set oParent to container of oObject
					end if
				else -- Toggle the project of this task
					set oParent to containing project of oObject
				end if
			end if
			if not my IsMember(oParent, lstParents) then set end of lstParents to oParent
		end if
	end repeat
	
	-- toggle each specified parent of tasks
	repeat with oParent in lstParents
		set blnNewState to not sequential of oParent
		my SetState(oParent, blnNewState)
	end repeat
end tell


-- Toggles the status of the project or parent task,
-- and optionally (depending on the value of pblnAllDescendantsInherit)
-- propagates the new state down to the last generation of descendants
on SetState(oObject, blnNewState)
	using terms from application "OmniFocus"
		tell oObject
			set sequential to blnNewState
			if pblnAllDescendantsInherit then
				set lstTasks to tasks
				repeat with oTask in lstTasks
					my SetState(oTask, blnNewState)
				end repeat
			end if
		end tell
	end using terms from
end SetState

-- List of objects selected in the window
on SelectedObjects(oWin)
	using terms from application "OmniFocus"
		tell oWin
			set refSeln to a reference to (selected trees of content)
			if (count of refSeln) < 1 then ¬
				set refSeln to a reference to (selected trees of sidebar)
			if (count of refSeln) < 1 then return {}
			value of refSeln
		end tell
	end using terms from
end SelectedObjects


-- Simple test for list membership
-- used to ensure that we don't toggle the same project twice
on IsMember(oElement, lstList)
	using terms from application "OmniFocus"
		repeat with oItem in lstList
			if id of oItem is id of oElement then return true
		end repeat
		false
	end using terms from
end IsMember

Last edited by RobTrew; 2010-06-24 at 11:06 PM.. Reason: Updated comments in code
 
Awesome! I'm looking forward to testing this out :)
 
FWIW updating this because I find I am using a much simpler script these days.

This toggles the selected subtree between sequential and parallel.

If the selection is a twig (rather than an action group or project), the immediate parent and all its descendants are all toggled to the same state.

If the selection is a parent (i.e. a project or a action group), then it and all its descendants are toggled to a uniform state.

Code:
tell application id "OFOC"
	tell front document window of front document
		set refTrees to a reference to (selected trees of content where class of its value is task or class of its value is project)
		if (count of refTrees) < 1 then set refTrees to a reference to (selected trees of sidebar where class of its value is project)
	end tell
	
	tell (value of refTrees) as list
		if (count) < 1 then return
		tell first item
			if (class ≠ project) and (count of its tasks) < 1 then
				set oParent to container
			else
				set oParent to it
			end if
		end tell
	end tell
	
	tell oParent
		set sequential to not (sequential)
		set sequential of flattened tasks to sequential
	end tell
end tell
--

Last edited by RobTrew; 2011-04-07 at 07:17 AM.. Reason: Slight rearrangement of the code for simpler reading
 
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help... Sequential/Parallel issue Avrum68 Applying OmniFocus 11 2009-02-03 12:45 PM
Sequential vs. Parallel villageboy OmniFocus 1 for Mac 2 2008-02-13 06:46 AM
Sequential Vs. Parallel Projects KPC OmniFocus 1 for Mac 1 2008-01-10 09:21 AM
Parallel and sequential subprojects javito OmniFocus 1 for Mac 16 2007-05-29 03:35 PM
Parallel or sequential by default? michelle OmniFocus 1 for Mac 16 2007-05-02 12:14 PM


All times are GMT -8. The time now is 03:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.