The Omni Group
These forums are now read-only. Please visit our new forums to participate in discussion. A new account will be required to post in the new forums. For more info on the switch, see this post. Thank you!

Go Back   The Omni Group Forums > OmniGraffle > OmniGraffle General
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
Automatic layout works poorly with orthogonal connectors Thread Tools Search this Thread Display Modes
The default geometry of Automatic layout is probably good enough for hierarchies with straight-line connectors, but the results which it produces with orthogonal connectors are oddly distracting – making parent-child relationships less clear, direct, and symmetrical than they should be by default.
It's not even clear that it makes more efficient use of space. It sometimes even seems to waste a little space.

Consider, for example:

Problems:
  1. Parents are not properly centred over their child ranges,
  2. single children are often linked to their parents by jagged three-stage lines with redundant corners, rather than by simple straight lines,
  3. and finally, the layout sometimes (depending on the tree) uses slightly more horizontal space than the simple centred layout below (which is generated by an Applescript).


I wonder if this could be corrected in future builds/versions ?

--

Last edited by RobTrew; 2011-11-07 at 09:33 AM..
 
The weakness of the default Automatic Layout for orthogonal connectors, seems, on inspection, to consist in an artificial gravitational compression of sibling ranges, which skews parents towards each other, and away from the centre of their respective child ranges.

( Rather like a dysfunctional family in which siblings never quite grow up, and, for lack of centred parental attention, continue to cling to each other, never becoming fully centered on their own children :-(

The result is this:


A more natural (and much more clear and legible) default would simply be:



Is this beyond the capacity of the underlying Graphviz engine ?

Could the strange and dysfunctional mutual attraction of siblings not be switched off, or at least made optional for orthogonally connected trees ?

(In the Automatic Layout version, it is not even clear whose children are whose ...)
 
Perhaps this is the clearest illustration of buggy or dysfunctional output from automatic layout that I have seen.

Here is a simple and symmetrical outline structure – easily grasped at a glance:



What does automatic layout do with it ?


  1. The symmetry of our data is concealed. Automatic layout misrepresents it as asymmetrical.
  2. Our clear and simple data becomes ambiguous. In fact, frankly unintelligible. Whose children are whose ?
  3. Unnecessary cognitive noise is introduced. Where we should have simple straight lines, to the left and right, we have distracting dog-legs, with two redundant corners each.

(For any philologists out there, this is known, in Oxford English, as a 'dog's breakfast').

Not sure if this is a bug report:
"Automatic layout introduces spurious asymmetries, ambiguities and distractions."
or a feature request:
"Plain vanilla orthogonal layouts (parents centered over child ranges) for nested structures, please."
Perhaps both ?

--
 
Wondering if this asymmetric and unreadable result of automatic layout was a quirk of a particular template, size or object spacing, I went to Omni's own gallery.

The foregrounded example, in position of honour at number one in the marketing material (available in the sample documents package) does show an awareness that users will need and expect a simple orthogonal layout of their outlines. And the example shown seems to promise reassuring symmetry and simplicity and readability. Just the kind of thing you would expect from an Automatic Layout function.

Foobar Inc are at first well-satisfied with their choice of OmniGraffle for their organisation chart.

Soon, however, the company reorganises a little. They go for a slightly flatter organisational structure, they promote one colleague, but also prune the payroll a little – not entirely unheard of ...

They return to OmniGraffle 5, update their outline, and click Automatic Layout. They are expecting this:


In fact, they get something asymmetrical and misleading, or at best, uninterpretable. Who reports to who at bottom left ?


Perhaps they have run into a one-off glitch ... The diagram is a bit wide anyway. Let's choose a left-to-right direction. Now what they are expecting is this:


What Automatic Layout actually produces is this:


Still oddly asymmetrical and messed up at the bottom ...

Omni's foregrounded gallery example gives the impression of offering clear, simple and symmetrical tree orthogonal layouts with parents centered over children. Clearly Omni knows that this is what people need and expect. Is this, in fact, what was intended by design ?

If so, there seems to be a structural clash between the design specifications and the actual capacities of the trumpeted 'underlying engine'.

If not, is there not a risk that the symmetry and clarity of the example given pride of place in the gallery might be a bit misleading ?

--
Attached Files
File Type: zip Org Chart NewStructure.graffle.zip (68.1 KB, 586 views)

Last edited by RobTrew; 2011-11-07 at 05:15 AM.. Reason: Added link to the sample documents on the Extras page
 
Or for a simpler experiment with orgchart.graffle in the sample documents, look at the center of the lower edge, where Mark Yu has only one person reporting to him.
  1. Open the outline sidebar, and use it to expand Mark Yu's team by one, so that two people now report to him, and apply Automatic Layout. The data is still symmetrical, but the diagram immediately becomes asymmetrical, and the jagged dog-leg links appear to left and right.
  2. Give Mark Yu a third team member, and apply Automatic Layout again, and the asymmetry becomes even more pronounced and strange.
  3. If his team grows to have five people reporting to him, Automatic Layout will again mess up the lower left corner of the diagram, and it will become unclear whether people are reporting to Mark Yu or to Jeff Monrow, the Office Manager ...
 
The gallery example of automatic layout:

might, I think, lead one to expect it to handle new hires with similar symmetry and clarity:

What Automatic Layout actually produces is rather less symmetrical, and a lot more unclear, unexpected and distracting:

Who reports to who ?
Why the dog's-leg lines in place of straight and simple verticals ?
Why is a symmetric outline represented with an asymmetric diagram ?

--

Last edited by RobTrew; 2011-11-07 at 12:45 AM..
 
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I undo automatic layout? gozulin OmniGraffle General 5 2012-07-18 04:26 PM
Script: clearer layout for orthogonal trees RobTrew OmniGraffle General 3 2011-10-31 01:10 PM
Automatic Layout with Automatic Re-alignment michael.prescott OmniGraffle General 0 2010-03-10 06:27 AM
Orthogonal Line Connectors Sophie OmniGraffle General 2 2009-03-14 03:36 PM
Automatic Layout with Orthogonal Lines and Midpoints stonematt OmniGraffle General 0 2008-06-24 12:17 PM


All times are GMT -8. The time now is 03:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.