The Omni Group
These forums are now read-only. Please visit our new forums to participate in discussion. A new account will be required to post in the new forums. For more info on the switch, see this post. Thank you!

Go Back   The Omni Group Forums > OmniFocus > Applying OmniFocus
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
How to view waiting fors for all projects, including those on hold? Thread Tools Search this Thread Display Modes
Having read the fabulous recent thread on using OF to decide what to do next, I just sat down to do my weekly review and put a ton of projects on hold. I am going to try only having active projects that I will truly work on this week.

The trouble I'm having is that when I got to review my "waiting fors" I can only see things that are in active projects and in the waiting context. I would like to be able to see everything in the waiting context, no matter what the project status is. Even if i'm not actively working on the project, i may want to send off a quick reminder or nudge to someone I am waiting for.

I have fiddled around with the filters and can't figure out how to do this. Any ideas? Is there some viewing option that I'm missing?

Many thanks!

Colleen
 
I always get a bit nervous when I answer what seems to be such an easy question, because I start to think I must be missing something. Sometimes, there's good reason to be nervous. This is one of those times! Answering your "simple" question exposed a gap in my understanding, which is that items in a project that is "on hold" or "dropped" will not show up in context mode, no matter what you do. For some reason, that had escaped me completely, and I'm glad you asked the question!

I tend not to put projects with even the slightest trace of activity on hold, so my usage is a bit different than yours. I don't think I've ever put a project on hold when waiting for someone or something. If I need to be sure that a wait will be limited before following up, I'll put a due date on the waiting for action.

I'm assuming in my answer that your "waiting fors" are contexts which are marked "on hold" (as are mine). I'm also assuming that you aren't putting the projects with "waiting fors" on hold, as mentioned above.

In context mode, turn on the view bar and put in these settings:


In the sidebar, select all of your "waiting for" contexts (which should be the only ones in the list, unless you have others which are also marked "on hold"). The content shown in the main pane should show all the actions which are causing projects to stall. However, it will also show the "waiting for" actions in projects where you haven't gotten to the "waiting for" action(s). For example, a project where you have to make a decision, then order something, then wait for the delivery will cause the wait for delivery step to appear in this list even though you might not yet have ordered. We have to select Remaining actions to pick up the "on hold" actions, because there is no "actions which would be available but aren't because they are on hold" filter. I personally don't find this to be too much of a problem because my projects usually go quickly up to the point where I'm waiting, and I often don't plan them out far enough that I need to insert a "waiting for" until, well, I'm waiting for something :-) If you want to examine all of the projects with "waiting for" actions to make sure that there isn't something else you should be done, you can do the following (which looks much worse than it is to do):
  1. bring up the previously mentioned settings (in context mode)
  2. click in the right hand pane on a project name, then do cmd-A or File->Select All
  3. switch from context mode to project mode (cmd-opt-R or View->Show in Planning Mode)
  4. focus on the selected items (cmd-cntrl-F, View->Focus on ..., Focus button in toolbar, or use the popup menu gotten by control-clicking in the sidebar)
  5. set the view filter to show remaining actions
  6. look at the resulting list of projects/actions

If you've done all of that without changing the selection by accident, your "waiting for" items will all be in the selected color scheme, and you can easily see if they are the next action for the project(s) they occupy, and if not, what remains to be done first. The following example shows a mix of possibilities.

 
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Waiting, on hold, projects & reviews: this is odd... TheAntonHein OmniFocus for iPad 3 2011-11-17 01:35 PM
On Hold vs. Waiting? matt1 OmniFocus 1 for Mac 8 2011-09-13 12:38 PM
Waiting (On Hold) Context Apples For Mike OmniFocus for iPhone 3 2009-01-03 12:06 PM
Using 'Waiting' context set to 'On Hold' or 'Active' lilyblossom OmniFocus 1 for Mac 15 2008-08-09 08:34 PM
Waiting Fors displaying incorrectly webbosoft OmniFocus 1 for Mac 8 2007-10-10 09:15 AM


All times are GMT -8. The time now is 01:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.