Cool. Thanks. I will integrate it into OmniFocus directly.
These forums are now read-only. Please visit our new forums to participate in discussion. A new account will be required to post in the new forums. For more info on the switch, see this post. Thank you!
|
|
FAQ | Members List | Calendar | Today's Posts | Search |
Sum of Estimated Times | Thread Tools | Search this Thread | Display Modes |
Member
2009-01-09, 06:52 AM
Cool. Thanks. I will integrate it into OmniFocus directly.
Post 11
|
Member
2009-01-29, 06:43 AM
Hey, thanks for making this. I was wondering if there's a way to have the script automatically in the project's estimated time.
Post 12
|
Member
2009-02-05, 08:14 PM
Thanks for the great script. I've been looking for something just like this. I modified the script slightly to change the output back to an improved Growl Notification. There are still two modifications I'd like to make:
1. Automatically insert the estimate time into the project or group. 2. In a project with several groups, I would like the script to calculate the estimated time for the project based on the group estimated times and not the group plus action estimated times. Currently, if you run the script on a group, then run the script on a whole project, it will return a result that is twice your intended result. Code:
-- Sum estimated times, display sum in Growl and copy sum to clipboard (for later pasting back into estimated time for an entire project, or elsewhere). -- Jake Bowers (jwb1970@gmail.com), 2008-24-10 -- largely based on RobTrew's StartTimer.scpt Ver 0.02 for code to adds up durations of selected tasks (http://forums.omnigroup.com/showthread.php?t=4748) -- and on hint from a11en in thread Minuteur Applescript for Growl Notification. (http://forums.omnigroup.com/showthread.php?t=6749) -- James O'Leary (jpo@me.com), 2008-08-11 -- now can handle context view "boxes) (assigned an estimated time of 0) and the time displayed is in hours and minutes instead of -- just a straight up hours number. Displays in dialog box now instead of copying to clipboard. Item count displayed as well. -- Aaron Hunyady (aaron@hunyady.net), 2009-08-01 -- Removed "cancel" button in dialog. Total time in minutes is copied to the clipboard. -- Ben Davidson (benjamin@idavidson.ca), 20009-05-02 -- Updated the Growl notification feature and removed the dialogue box (you need to install the Growl extra, "growlnotify" - included in the install disk image) -- Changed some of the dialog wording tell application "OmniFocus" tell front document tell document window 1 set oTrees to selected trees of content set lngTrees to count of oTrees if lngTrees > 0 then set lngTotal to 0 repeat with iTree from 1 to lngTrees set oTask to value of (item iTree of oTrees) try set lngMinutes to estimated minutes of oTask on error set lngMinutes to 0 end try if lngMinutes as string is equal to "missing value" then set lngMinutes to 0 end if set lngTotal to lngTotal + lngMinutes end repeat end if set the clipboard to lngTotal as rich text -- do shell script "/usr/local/bin/growlnotify OmniFocus -m 'Total time " & lngTotal & " minutes' -p 1" end tell end tell set lngHours to 0 repeat if lngTotal < 60 then exit repeat set lngTotal to lngTotal - 60 set lngHours to lngHours + 1 end repeat end tell if lngHours = 1 then set strPluralHours to " hour " else set strPluralHours to " hours " end if if lngMinutes = 1 then set strPluralMinutes to " minute" else set strPluralMinutes to " minutes" end if if lngTrees = 1 then set strPluralTasks to "task" else set strPluralTasks to "tasks" end if do shell script "/usr/local/bin/growlnotify Estimated Project Time -a OmniFocus -m ' " & lngTrees & " " & strPluralTasks & " " & (lngHours) & "" & strPluralHours & "and " & lngTotal & "" & strPluralMinutes & "' "
Post 13
|
Member
2011-01-30, 11:37 AM
Updated version allows customization for use of growl or dialog box, and gracefully handles case where growl not present. Also warns if there are tasks in the selection which do not have duration estimates.
Code:
-- Sum estimated times, display sum in Growl and copy sum to clipboard (for later pasting back into estimated time for an entire project, or elsewhere). -- Jake Bowers (jwb1970@gmail.com), 2008-24-10 -- largely based on RobTrew's StartTimer.scpt Ver 0.02 for code to adds up durations of selected tasks (http://forums.omnigroup.com/showthread.php?t=4748) -- and on hint from a11en in thread Minuteur Applescript for Growl Notification. (http://forums.omnigroup.com/showthread.php?t=6749) -- James O'Leary (jpo@me.com), 2008-08-11 -- now can handle context view "boxes) (assigned an estimated time of 0) and the time displayed is in hours and minutes instead of -- just a straight up hours number. Displays in dialog box now instead of copying to clipboard. Item count displayed as well. -- Aaron Hunyady (aaron@hunyady.net), 2009-08-01 -- Removed "cancel" button in dialog. Total time in minutes is copied to the clipboard. -- Ben Davidson (benjamin@idavidson.ca), 20009-05-02 -- Updated the Growl notification feature and removed the dialogue box (you need to install the Growl extra, "growlnotify" - included in the install disk image) -- Changed some of the dialog wording -- Bill Palmer, 2011-01-30 -- Control use of growl vs. dialog box with useGrowlPref property, gracefully handle case where growlnotify not installed. -- Also warn if any of the included tasks did not have a duration estimate property useGrowl : false -- set this to false if you don't (want to) use Growl property growlNotifyPath : "/usr/local/bin/growlnotify" -- default location for growlnotify installation tell application "OmniFocus" tell front document tell document window 1 set oTrees to selected trees of content set lngTrees to count of oTrees set underEstimate to "" if lngTrees > 0 then set lngTotal to 0 repeat with iTree from 1 to lngTrees set oTask to value of (item iTree of oTrees) try set lngMinutes to estimated minutes of oTask on error set lngMinutes to 0 end try if lngMinutes as string is equal to "missing value" then set lngMinutes to 0 set underEstimate to " Warning: a task had no estimated duration!" end if set lngTotal to lngTotal + lngMinutes end repeat end if set the clipboard to lngTotal as rich text end tell end tell set lngHours to 0 repeat if lngTotal < 60 then exit repeat set lngTotal to lngTotal - 60 set lngHours to lngHours + 1 end repeat end tell if lngHours = 1 then set strPluralHours to " hour " else set strPluralHours to " hours " end if if lngMinutes = 1 then set strPluralMinutes to " minute" else set strPluralMinutes to " minutes" end if if lngTrees = 1 then set strPluralTasks to "task" else set strPluralTasks to "tasks" end if if useGrowl then set fp to (POSIX file growlNotifyPath) tell application "Finder" if not (exists fp) then set useGrowl to false end if end tell end if if useGrowl then do shell script growlNotifyPath & " Estimated Project Time -a OmniFocus -m ' " & lngTrees & " " & strPluralTasks & " " & (lngHours) & "" & strPluralHours & "and " & lngTotal & "" & strPluralMinutes & underEstimate & "' " else display dialog "Item count: " & lngTrees & " " & "Total time: " & (lngHours) & strPluralHours & lngTotal & strPluralMinutes & underEstimate buttons {"OK"} default button 1 end if Last edited by whpalmer4; 2011-01-30 at 12:05 PM..
Post 14
|
Member
2011-07-08, 08:47 AM
Wow, not sure how I missed this thread before writing my own almost three years later...
Post 15
|
Member
2011-07-08, 09:28 AM
Eh, I often have difficulty finding threads or posts that I know exist; searching for something that may not exist, or may have been named much differently, is more difficult.
I've occasionally thought of trying to put together a modest catalog of all of the scripts that are posted, so that someone could easily see what has been done before, but when that happens, I immediately take a nap until the feeling passes :-) Of course, once you've got the catalog of what has been done, the natural next step would be to do the same for scripts that have been suggested or requested.
Post 16
|
Member
2011-07-12, 10:17 AM
Seems like the sort of thing a forum system is poorly equipped to handle, and would be a *lot* of work for one person to maintain. Would be nice to have a Digg-like voting system for such things (and more general feature requests).
Post 17
|
Member
2012-06-13, 05:59 PM
I am trying to make a script that will total the minutes and add 5 minutes to every 25 minutes of actions. That way I can quickly total how much real time will be spent doing tasks. So for example 55 minutes of actions would be 2 pomodoro's and a total of two 5 minute breaks (10 minutes) or an hour with five minutes of extra time that didn't fit in a pomodoro.
I am stuck for some reason this won't repeat on minutes higher than 100 and I can't figure out why. Copy into your clipboard 76 and then run this script and it works as expected. Then copy into your clipboard 100 and run this script and you can see it doesn't repeat totalMinutes even though it is less then 25 as listed. Code:
set totalMinutes to the clipboard set numberOfPomodoros to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat if totalMinutes < 25 then exit repeat set totalMinutes to totalMinutes - 25 --This subtracts the minutes each time and allows you to convert it into hours each time it loops in the next line. set numberOfPomodoros to numberOfPomodoros + 1 --This makes the every 25 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat set totalMinutes to the clipboard --This just takes the IngTotal that was set in the clipboard and starts fresh again with total minutes of all selected actions. set pomodoroWithBreak to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat if totalMinutes < 25 then exit repeat set totalMinutes to totalMinutes - 25 --This subtracts the minutes each time and allows you to convert it into hours each time it loops in the next line. set pomodoroWithBreak to pomodoroWithBreak + 30 --This makes the every 25 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat set pomodoroHours to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat if pomodoroWithBreak < 60 then exit repeat set pomodoroWithBreak to pomodoroWithBreak - 60 --This subtracts the minutes of each pomodoro + the 5 minute break figured from above set pomodoroHours to pomodoroHours + 1 --This makes the 60 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat display dialog "Total full pomodoros : " & numberOfPomodoros & " +" & totalMinutes & " minutes extra" & return & "Total pomodoro time: " & pomodoroHours & " hours " & totalMinutes & " minutes" buttons {"OK"} default button 1 Code:
--http://forums.omnigroup.com/showthread.php?t=9983 -- Sum estimated times, display sum in Growl and copy sum to clipboard (for later pasting back into estimated time for an entire project, or elsewhere). -- Jake Bowers (jwb1970@gmail.com), 2008-24-10 -- largely based on RobTrew's StartTimer.scpt Ver 0.02 for code to adds up durations of selected tasks (http://forums.omnigroup.com/showthread.php?t=4748) -- and on hint from a11en in thread Minuteur Applescript for Growl Notification. (http://forums.omnigroup.com/showthread.php?t=6749) -- James O'Leary (jpo@me.com), 2008-08-11 -- now can handle context view "boxes) (assigned an estimated time of 0) and the time displayed is in hours and minutes instead of -- just a straight up hours number. Displays in dialog box now instead of copying to clipboard. Item count displayed as well. -- Aaron Hunyady (aaron@hunyady.net), 2009-08-01 -- Removed "cancel" button in dialog. Total time in minutes is copied to the clipboard. -- Ben Davidson (benjamin@idavidson.ca), 20009-05-02 -- Updated the Growl notification feature and removed the dialogue box (you need to install the Growl extra, "growlnotify" - included in the install disk image) -- Changed some of the dialog wording -- Bill Palmer, 2011-01-30 -- Control use of growl vs. dialog box with useGrowlPref property, gracefully handle case where growlnotify not installed. -- Also warn if any of the included tasks did not have a duration estimate property useGrowl : false -- set this to false if you don't (want to) use Growl property growlNotifyPath : "/usr/local/bin/growlnotify" -- default location for growlnotify installation tell application "OmniFocus" tell front document tell document window 1 set oTrees to selected trees of content set lngTrees to count of oTrees set underEstimate to "" if lngTrees > 0 then set lngTotal to 0 --This is here so when you repeat for multiple selected actions it works repeat with iTree from 1 to lngTrees set oTask to value of (item iTree of oTrees) try set lngMinutes to estimated minutes of oTask on error set lngMinutes to 0 end try if lngMinutes as string is equal to "missing value" then set lngMinutes to 0 set underEstimate to " Warning: a task had no estimated duration!" end if set lngTotal to lngTotal + lngMinutes --IngTotal now equals the total number of minutes. This seems more complicated than it needs to be. --set lngTotal to lngMinutes --No need to add 0 when all you need is the number if you onlly have one selected action. Otherwise it would set the last selected action as the IngTotal end repeat end if set the clipboard to lngTotal as rich text -- This doesn't seem to be needed end tell end tell set lngHours to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat --IngTotal at this point is the total of all selected actions in minutes if lngTotal < 60 then exit repeat set lngTotal to lngTotal - 60 --This subtracts the minutes each time and allows you to convert it into hours each time it loops in the next line. This leaves IngTotal with a value less then 60 which is the minutes left. set lngHours to lngHours + 1 --This makes the 60 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat end tell if lngHours = 1 then set strPluralHours to " hour " --These just makes the sentence read correctly else set strPluralHours to " hours " end if if lngMinutes = 1 then set strPluralMinutes to " minute" else set strPluralMinutes to " minutes" end if if lngTrees = 1 then set strPluralTasks to "task" else set strPluralTasks to "tasks" end if set totalMinutes1 to the clipboard set totalMinutes2 to the clipboard set numberOfPomodoros to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat if totalMinutes2 < 25 then exit repeat set totalMinutes2 to totalMinutes2 - 25 --This subtracts the minutes each time and allows you to convert it into hours each time it loops in the next line. set numberOfPomodoros to numberOfPomodoros + 1 --This makes the every 25 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat set totalMinutes3 to the clipboard --This just takes the IngTotal that was set in the clipboard and starts fresh again with total minutes of all selected actions. set pomodoroWithBreak to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat if totalMinutes3 < 25 then exit repeat set totalMinutes3 to totalMinutes3 - 25 --This subtracts the minutes each time and allows you to convert it into hours each time it loops in the next line. set pomodoroWithBreak to pomodoroWithBreak + 30 --This makes the every 25 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat set pomodoroHours to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat if pomodoroWithBreak < 60 then exit repeat set pomodoroWithBreak to pomodoroWithBreak - 60 --This subtracts the minutes of each pomodoro + the 5 minute break figured from above set pomodoroHours to pomodoroHours + 1 --This makes the 60 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat --set if useGrowl then set fp to (POSIX file growlNotifyPath) tell application "Finder" if not (exists fp) then set useGrowl to false end if end tell end if if useGrowl then do shell script growlNotifyPath & " Estimated Project Time -a OmniFocus -m ' " & lngTrees & " " & strPluralTasks & " " & (lngHours) & "" & strPluralHours & "and " & lngTotal & "" & strPluralMinutes & underEstimate & "' " else display dialog "Item count: " & lngTrees & " " & "Total time: " & lngHours & strPluralHours & lngTotal & strPluralMinutes & return & "Total minutes: " & totalMinutes1 & return & underEstimate & return & "Total full pomodoros : " & numberOfPomodoros & " +" & totalMinutes2 & " minutes extra" & return & "Total pomodoro time: " & pomodoroHours & " hours " & totalMinutes3 & " minutes" buttons {"OK"} default button 1 (*I don't understand why they need the parenthesis around IngHours it doesn't seem to make a difference so I took it out above since it seemed confusing display dialog "Item count: " & lngTrees & " " & "Total time: " & (lngHours) & strPluralHours & lngTotal & strPluralMinutes & return & "Total minutes: " & totalMinutes & return & underEstimate buttons {"OK"} default button 1 *) (* This is how I would do it but they are just putting returns in the quotes above which is another way I didn't realize you could do until today 2012-06-13 display dialog "Item count: " & lngTrees & return & "Total time: " & (lngHours) & strPluralHours & lngTotal & strPluralMinutes & return & underEstimate buttons {"OK"} default button 1 *) end if --IngTrees = Number of tasks selected --IngHours = Total hours of selected tasks --IngTotal = Total minutes of selected tasks --Cli (* This is an example of how to set the contents of the clipboard and also set the clipboard to a variable. http://macscripter.net/viewtopic.php?id=8396 set myString to "Hello There!" set the clipboard to myString -- This is how you set the clipboard to a name so you can use that value. set myClipboard to the clipboard *) Last edited by skillet; 2012-06-18 at 05:35 AM..
Post 18
|
Member
2012-06-14, 07:05 PM
The problem is that you're reading that number in as a string, not a number. After that is resolved, the rest of the code doesn't work quite right, at least as I understand the goal. I've attached a version that figures out how many whole pomodori are required, plus the minutes of a fractional pomodoro, plus a 5 minute break after each full pomodoro. If it's not what you wanted, well, as my long-ago boss was fond of saying, you know where the sources are...
Code:
(* test values: 0 15 25 26 76 300 301 325 326 *) property pFullPomodoroMinutes : 25 property pFullPomodoroBreak : 5 property pHour : 60 set requestedMinutes to the clipboard as integer set numberOfPomodoros to requestedMinutes div pFullPomodoroMinutes set fractionalPomodoroMinutes to requestedMinutes - (numberOfPomodoros * pFullPomodoroMinutes) set totalMinutes to numberOfPomodoros * (pFullPomodoroMinutes + pFullPomodoroBreak) + fractionalPomodoroMinutes set pomodoroHours to totalMinutes div pHour set pomodoroMinutes to totalMinutes - (pomodoroHours * pHour) display dialog "Total full pomodoros : " & numberOfPomodoros & " +" & fractionalPomodoroMinutes & " additional minutes" & return & "Total pomodoro time: " & pomodoroHours & " hours " & pomodoroMinutes & " minutes" buttons {"OK"} default button 1
Post 19
|
Member
2012-06-18, 11:07 AM
Quote:
See the link for the finished script. http://reference.studioprime.com/for...l_Pomodoro.zip I hope some day I meet you so I can thank you in person. Your skills amaze and wow me! Thanks for helping me, especially when I know you aren't into tracking time like this. In case the link gets broken here is the script. Code:
--http://forums.omnigroup.com/showthread.php?t=9983 -- Pomodoro addition Whpalmer4 and Adam Olson, 2012-06-18 -- Sum estimated times, display sum in Growl and copy sum to clipboard (for later pasting back into estimated time for an entire project, or elsewhere). -- Jake Bowers (jwb1970@gmail.com), 2008-24-10 -- largely based on RobTrew's StartTimer.scpt Ver 0.02 for code to adds up durations of selected tasks (http://forums.omnigroup.com/showthread.php?t=4748) -- and on hint from a11en in thread Minuteur Applescript for Growl Notification. (http://forums.omnigroup.com/showthread.php?t=6749) -- James O'Leary (jpo@me.com), 2008-08-11 -- now can handle context view "boxes) (assigned an estimated time of 0) and the time displayed is in hours and minutes instead of -- just a straight up hours number. Displays in dialog box now instead of copying to clipboard. Item count displayed as well. -- Aaron Hunyady (aaron@hunyady.net), 2009-08-01 -- Removed "cancel" button in dialog. Total time in minutes is copied to the clipboard. -- Ben Davidson (benjamin@idavidson.ca), 20009-05-02 -- Updated the Growl notification feature and removed the dialogue box (you need to install the Growl extra, "growlnotify" - included in the install disk image) -- Changed some of the dialog wording -- Bill Palmer, 2011-01-30 -- Control use of growl vs. dialog box with useGrowlPref property, gracefully handle case where growlnotify not installed. -- Also warn if any of the included tasks did not have a duration estimate property useGrowl : false -- set this to false if you don't (want to) use Growl property growlNotifyPath : "/usr/local/bin/growlnotify" -- default location for growlnotify installation property pFullPomodoroMinutes : 25 property pFullPomodoroBreak : 5 property pHour : 60 tell application "OmniFocus" tell front document tell document window 1 set oTrees to selected trees of content set lngTrees to count of oTrees set underEstimate to "" if lngTrees > 0 then set lngTotal to 0 --This is here so when you repeat for multiple selected actions it works repeat with iTree from 1 to lngTrees set oTask to value of (item iTree of oTrees) try set lngMinutes to estimated minutes of oTask on error set lngMinutes to 0 end try if lngMinutes as string is equal to "missing value" then set lngMinutes to 0 set underEstimate to " Warning: A task had no estimated duration!" end if set lngTotal to lngTotal + lngMinutes --IngTotal now equals the total number of minutes. This seems more complicated than it needs to be. --set lngTotal to lngMinutes --No need to add 0 when all you need is the number if you onlly have one selected action. Otherwise it would set the last selected action as the IngTotal end repeat end if set the clipboard to lngTotal as rich text -- This doesn't seem to be needed end tell end tell set lngHours to 0 --We need this as our starting point, if you make this a 1 then it would always be one hour more than your total or a 2 is two hours more than your real total repeat --IngTotal at this point is the total of all selected actions in minutes if lngTotal < 60 then exit repeat set lngTotal to lngTotal - 60 --This subtracts the minutes each time and allows you to convert it into hours each time it loops in the next line. This leaves IngTotal with a value less then 60 which is the minutes left. set lngHours to lngHours + 1 --This makes the 60 minutes you subtracted above get converted into 1 hour and then when it loops again if it can it adds one to the new total of hours. Pretty neat! end repeat end tell if lngHours = 1 then set strPluralHours to " hour " --These just makes the sentence read correctly else set strPluralHours to " hours " end if if lngMinutes = 1 then set strPluralMinutes to " minute" else set strPluralMinutes to " minutes" end if if lngTrees = 1 then set strPluralTasks to "task" else set strPluralTasks to "tasks" end if ----- --Pomodoro portion by whpalmer4 + some additional stuff. set requestedMinutes to the clipboard as integer set numberOfPomodoros to requestedMinutes div pFullPomodoroMinutes set fractionalPomodoroMinutes to requestedMinutes - (numberOfPomodoros * pFullPomodoroMinutes) set totalMinutes to numberOfPomodoros * (pFullPomodoroMinutes + pFullPomodoroBreak) + fractionalPomodoroMinutes set pomodoroHours to totalMinutes div pHour set pomodoroMinutes to totalMinutes - (pomodoroHours * pHour) set totalBreakMinutes to numberOfPomodoros * pFullPomodoroBreak set totalBreakHours to totalBreakMinutes div pHour set fractionalBreakMinutes to totalBreakMinutes - (pHour * totalBreakHours) --- if fractionalPomodoroMinutes = 1 then set fractionalPomodoroMinutesPlural to " additional minute " else set fractionalPomodoroMinutesPlural to " additional minutes " end if if pomodoroHours = 1 then set pomodoroHoursPlural to " hour " else set pomodoroHoursPlural to " hours " end if if pomodoroMinutes = 1 then set pomodoroMinutesPlural to " minute " else set pomodoroMinutesPlural to " minutes " end if if totalBreakHours = 1 then set totalBreakHoursPlural to " hour " else set totalBreakHoursPlural to " hours " end if if pomodoroMinutes = 1 then set fractionalBreakMinutesPlural to " minute " else set fractionalBreakMinutesPlural to " minutes " end if --- ----- if useGrowl then set fp to (POSIX file growlNotifyPath) tell application "Finder" if not (exists fp) then set useGrowl to false end if end tell end if if useGrowl then do shell script growlNotifyPath & " Estimated Project Time -a OmniFocus -m ' " & lngTrees & " " & strPluralTasks & " " & (lngHours) & "" & strPluralHours & "and " & lngTotal & "" & strPluralMinutes & underEstimate & "' " else display dialog "Selected actions: " & lngTrees & " " & "Total time of selected actions: " & return & lngHours & strPluralHours & lngTotal & strPluralMinutes & return & return & return & "Total pomodoro time: " & return & pomodoroHours & pomodoroHoursPlural & pomodoroMinutes & pomodoroMinutesPlural & return & return & "Total break time: " & return & totalBreakHours & totalBreakHoursPlural & fractionalBreakMinutes & fractionalBreakMinutesPlural & return & return & "Total full pomodoros: " & return & numberOfPomodoros & " +" & fractionalPomodoroMinutes & fractionalPomodoroMinutesPlural & return & return & underEstimate buttons {"OK"} default button 1 end if --IngTrees = Number of tasks selected --IngHours = Total hours of selected tasks --IngTotal = Total minutes of selected tasks Last edited by skillet; 2012-06-19 at 10:30 AM..
Post 20
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Estimated Time of Zero | skillet | OmniFocus 1 for Mac | 2 | 2012-04-09 01:22 PM |
Estimated Time? | sirluce | OmniFocus for iPad | 3 | 2010-12-03 03:55 AM |
Can OF Give Total Estimated Time? | klaing | OmniFocus 1 for Mac | 2 | 2009-07-22 07:10 PM |
Calculated Estimated Time on Projects | bjabernethy | OmniFocus 1 for Mac | 2 | 2007-05-23 07:13 PM |